Victron Energy Lynx DC Distribution system is a modular bus bar system with positions for MEGA fuses and on some models a main fuse.
The Lynx Distributors can be used on inputs (batteries) to a Lynx shunt and on outputs from the shunt to power loads.
Two shunts are available, the Lynx Shunt VE.Can which can be used with any battery type and the Lynx Smart BMS that can be used with Victron SmartLithium batteries only and some third party Victron approved lithium batteries.
The Lynx Shunt VE.Can provides battery state of charge etc similar to a SmartShunt or BMV-712. It also has a position for a main system fuse (ANL type). Use a Cerbo GX or other GX device for programing and reading device parameters.
The Lynx Smart BMS connects to Victron SmartLithium batteries and includes a battery management system, shunt and contactor that will disconnect loads and charge sources in the event that normal controls do not work as intended. The contactor can also be used as a store switch to turn off all loads and charge sources. Use a Cerbo GX or other GX device for programing and reading device parameters.
MEGA fuses and fuse holders are ideal for higher ampacity loads and are the fuses used in the Lynx Distributor.